How to Specify
Instyle Decking - How to Specify
To assist in achieving your desired result, the following information should be drafted into your project specifications to ensure that inferior products are not used on your project.
All timber decking surfaces to be Instyle Decking, with concealed fixings, supplied according to the following specification and installed in accordance with the Building Codes of Australia and the manufacturer’s installation guidelines.
Example...Please use this format when specifying
- Product Name:
- Instyle Decking
- Legend:
- ISD
- Profile Size:
- (88 x 20mm or 135 x 26mm)
- Timber Species:
- (Ironbark, Spotted Gum or Blackbutt) others available on request
- Grade:
- Natural Select (min 2/3 select, max 1/3 standard)(Select Grade available on request)
- Moisture Content:
- 10-14%
- Fixing:
- Nylon Concealed fixing clips with square drive, self drilling screws supplied by Urbanline.
- Finishing:
- Pre-oiled with 1 coat of Cutek Wood Preservative clear, additional top coats with colourtone onsite (after installation by others)
- Note:
-
- Timber joists to be covered with joist flashing
- All exposed edges to be finished with proprietary Instyle edge moulding
- All end grains to be properly sealed with Cutek Wood Preservative
- Timber must be acclimatised prior to installation
- Adhere to expansion and contraction requirements
- Contact Urbanline regarding any special requirements or queries
Manufacturer and Supplier:
Urbanline
- Ph:
- 1300 658 638
- email:
- sales@urbanline.com.au
- web:
- www.urbanline.com.au
Newport Cladding - How to Specify
To assist in achieving your desired result, the following information should be drafted into your project specifications to ensure that inferior products are not used on your project.
All denoted facade areas to be Newport Cladding, supplied according to the following specification and installed in accordance with the Building Codes of Australia, and the manufacturer’s installation guidelines.
Example...Please use this format when specifying
- Product Name:
- Newport Cladding
- Legend:
- NPC
- Profile Name:
- (Beechgrove, Portside, Atoka, Platinum, Bayside)
- Timber Species:
- (Ironbark, Spotted Gum or Blackbutt) others available on request
- Size:
- (138x19mm or 90x19mm)
- Grade:
- Natural Select (min 2/3 select, max 1/3 standard)
- Moisture Content:
- 10-14%
- Fixing:
- Concealed fixing with 8g stainless steel screws or 1.6gx45mm Stainless steel nails.
- Board Direction:
- (horizontal/vertical)
- Finishing:
- Pre-oiled with 1 coat of Cutek Wood Preservative
- Butt Joints:
- Optional end matching
- Note:
-
- Must be installed over breathable sarking
- All end grains to be properly sealed
- Timber must be acclimatised prior to installation
- Adhere to expansion and contraction requirements
- Contact Urbanline regarding any special requirements or queries
Manufacturer and Supplier:
Urbanline
- Ph:
- 1300 658 638
- email:
- sales@urbanline.com.au
- web:
- www.urbanline.com.au